USM Haller Lowboard M with Extension, Customisableby Fritz Haller & Paul Schärer — from 782,00 €
(1) Height: 56,5 cm
(2) Length: 78 cm
(3) Depth: 38 cm
Ball centre to ball centre
(1) Height: 52,5 + 4 cm
(2) Length: 75 cm
(3) Depth: 35 cm
|Weight||22 kg (version with drop-down doors)|
|Colour chart||Request a USM Haller Colour Fan|
|Material||Panels: metal, powder coated
Structure: steel, chrome plated
Ball: brass, chrome plated
|Variants||Optionally available with drop-down or extension door
Optionally available with a cable outlet in the back wall
|Function & properties||Lowboard can be extended in all directions
Inflammable class 1
|Care||Chrome plated, powder coated and glass elements should be cleaned with a damp, light cloth and subsequently dried.
Stubborn stains can be cleaned with glass cleaner or water mixed with ethanol in a ratio of 10:1.
|Awards & museum||Permanent collection MoMA, New York|
|Certificates & Sustainability||Inflammable class 1 (DIN 4102)
GREENGUARD - Indoor Air Quality
LEED "Green Directive"
|Datasheet||Click for more information (ca. 1,6 MB).
Is it possible to equip the USM lowboard with castors?
What is the carrying capacity of a metal panel?
The maximum permissible load (surface load) for all metal elements up to a size of 750x500 mm is 50 kg.
Heavy point-like loads (eg a metal sculpture on a small base) can cause severe deflections. In such cases, and for general loads over 50 kg, please employ additional Support Profile 750.
The USM Haller Lowboard M with Extension, Customisable by Fritz Haller & Paul Schärer belongs to the extensive product portfolio of the Swiss manufacturer USM Haller and is based on the same design principle as all other USM furniture: steel tubes form a skeleton, metal panels serve as the body and chrome plated brass balls keep everything together. The USM Lowboard M is customisable, can be easily extended in all directions and is available in several different versions including, for example with a drop-down door or an extension shelf. In addition a cable outlet can be provided in the rear wall of the USM Lowboard this allowing for optimal placement of electric equipment. All possible options and versions can be realised with the aid of the USM Configurator.