(1) Height: 74 cm
(2) Length: 78 cm
(3) Depth: 38 cm
Ball centre to ball centre
(1) Height: 70 + 4 cm
(2) Length: 75 cm
(3) Depth: 35 cm
|Weight||22 kg (without doors)|
|Material||Panels: Metal, powder coated
Structure: Steel, chrome plated
Ball: Brass, chrome plated
|Variants||Optionally available with drop-down doors or extension doors|
|Colour charts||Request a USM Haller Colour Fan|
|Functions & Properties||Sideboard can be extended in all directions
Inflammable class 1
|Care||Chrome plated, powder coated and glass elements should be cleaned with a damp, light cloth and subsequently dried.
Stubborn stains can be cleaned with glass cleaner or water mixed with ethanol in a ratio of 10:1
|Awards & Museums||Permanent collection MoMA, New York|
|Certificates||Inflammable class 1 (DIN 4102)
GREENGUARD - Indoor Air Quality
LEED "Green Directive"
|Product datasheet||Please click on picture for detailed information (ca. 1,6 MB).
Can I build and rebuild USM furniture myself?
The USM furniture system is a modular system which can be rebuilt and reconfigured at any time. The USM Haller furniture system also consists of over 2,000 items. Because of this complexity, it is important that any major assembly, de-assembly or reconfiguration work is carried out by to get carry out by specially trained technicians. Not least, because such guarantees the value and longevity of the products. Incorrect installation risks damaging the units, damage which can then mean even far greater effort and cost to repair.
Can I transform my USM sideboard into a USM highboard?
In principle yes, as before though only with the assistance of trained technicians.
If the USM sideboard also available in the 500 mm depth?
Yes, this is of course possible. Please contact our USM Service Team for a quote, or alternatively make use of our USM Haller configurator to design your own.
As with all other USM shelves the design of the USM sideboard is based on a very simple principle: chrome plated steel tubes connected via chrome plated brass balls form a skeleton which is then filled with metal shelves or glass elements. And it is this simplicity that makes USM such a competent all-rounder. The modular USM Haller design can take various forms and, true to the motto "form follows function", offers tailored solutions for any situation. The USM philosophy also includes the assumption that furniture is not a fixed state but a continual process. Consequently USM furniture is especially suitable for regular conversion. The designer Fritz Haller was an architect and developed office furniture system as part of a commission for the USM office pavilion in Münsingen, Switzerland. Since 1969 the USM Haller furniture has been produced in series and is not only a recognised office furniture design classic, but also a much loved classic in context of domestic furniture. The USM Sideboard M with drop-down doors and/or extension doors can be configured to exactly suit your needs, the possibilities being as varied as the USM colour spectrum.
Born on October 23, 1924 in Solothurn, Switzerland Fritz Haller trained as a carpenter before moving on to follow in his father architectural footsteps. His cooperation with USM Haller began 1961 when company owner Paul Schärer commissioned him with the construction of new production and administration building. In 1963 Schärer requested a furniture system for the new for the USM office pavilion: the modular system he developed having since moved on from being a classic example of office equipment to be a classic example of office equipment and living area design classic. From the 1970s, Fritz Haller taught architecture at the University's of Karlsruhe and Stuttgart. On October 15, 2012 Fritz Haller died in Solothurn.
The production of USM Haller begins in Switzerland. There, where the furniture system also originated, all parts are produced and the metal shelves powder coated in the famous 14 USM colours. The assembly of USM furniture intended for the for German market takes place in Buhl, Baden-Württemberg, where the company has a manufacture and distribution centre. For a company such as USM ecological responsibility is reflected in many ways. For example, all manufacturing processes are designed to be environmentally justifiable, while the placing of the production and distribution sites reduces transport based CO2 emissions. Then there is the products very