The USM Haller lock can be effortlessly retrofitted to a USM unit and allows for the safely storage of important documents or valuables. The lock comes with two keys and can be ordered with or without a fixing set.
|Lock for retrofitting to USM drop-down and extension doors
|Optionally available with or without fitting set
Where a normal handle (without barrel) is present, the fitting set can be used. The smow USM service team can provide more detailed information.
|Function & properties
|Suitable for USM Haller units with drop-down or extension door of the current generation.
For locks for USM flip-up doors, please contact the smow USM customer service team
If you have existing USM Haller locks and require locks operable with the the same key, please let us know. Lock numbers 201-300 / closing circuit 7003 are available, these numbers are stamped on the keys. If no key is be available you can find the number on the inner portion of the lock. To read this is is however necessary to first disassemble the lock
|Simply loosen the screws of the standard handle and replace the standard grip by the lock handle. Then insert screws.
An installation manual is included with the delivery.
|1 lock with 2 keys (Optional mounting set)