Products
Rooms
Manufacturers & Designers
Highlights
Offers
Info
Stores
Storage
- Shelves & Cabinets
- Bookshelves
- Wall Mounted Shelving
- Sideboards & Commodes
- Multimedia Units
- Side & Roll Container
- Bar Trolley
- Wardrobes
- Occasional Storage
- Components
- ... all Storage
Service
Louis Poulsen
by Verner Panton, 1971/2024
— from 180,00 €
Panthella 160 Portable V3, Chrome
Louis Poulsen Panthella 160 Portable V3
has been added to your wishlist.
has been added to your wishlist.
Click here for more images
They are here: The new Panthella 160 Portable V3 lamps - design classics created by Verner Panton for Louis Poulsen. The rechargeable luminaires shine in 6 new colour variants, have updated technology and a significantly longer battery life at full power. They are also equipped with a previously unavailable touch and dimming function and provide pleasant lighting both indoors and outdoors.
Details
| Product type | Table lamp/Rechargeable lamp |
| Dimensions |   Dimensions in mm Charging cable 1,5 m |
| Weight | 0,4 kg |
| Colours |
               |
| Material | Shade: injection-moulded polycarbonate Base and body: injection-moulded polycarbonate |
| Function & Properties | What's new with V3: Same look and feel as with previous versions No metal shades, only polymer shades New touch dim on/off at the top nut – no switch Extended battery life: up to 8,5 hours at 100% brightness Rechargable via USB-C, no more QI-charging Six additional new colours Battery: Rechargeable and replaceable 1 x Li-Ion 18650 (3100 mAh) Charging time: 5 h Dimmable in 3 steps: 0%, 10%, 33%, 100% Waterproof, approved for outdoor use Soft and diffuse light Light reflected downwards 100 % glare-free LED 2,5 W | 2700 K | 150 lm Runtimes: 100% - 8,5 h 33% - 25,5 h 10% - 79 h Important information on commissioning: The portable lights from Louis Poulsen are supplied in transport mode to protect the batteries. Transport mode must be deactivated for initial start-up. To do this, connect the light to the mains using the USB-C cable supplied. Make sure that at least 1.5 A is available. Then touch the ON/OFF/DIM switch on the top of the light. The status indicator (next to the USB port) should now light up and start pulsing. The light flashes twice and is now no longer in transport mode. If this process is not successful, please check the cable and mains adapter used for suitability. |
| Delivery includes | Built-in LED Incl. USB-C cable Adapter for charging (output min. 1,5 A) not included with delivery |
| Care | A mild soap with plenty of clean water is recommended for cleaning to avoid scratches. To restore the shine of your lamp we recommend polishing the lamp regularly with a dry cloth. |
| Certificates & Sustainability | Protection class IP44 |
| Warranty | 24 months |
| Product family | Panthella Collection |
| Datasheet | Please click on the picture for detailed information (ca. 1,6 MB). |
Offers
Offer
Offer
Offer
Offer
Offer
Offer
Offer
Offer
Offer
Offer
Offer
Popular versions
New
New
FAQ
?
Should the answers to your questions not be found here, our service team can be contacted Mon-Fri, 9 am - 5 pm via +49 341 2222 88 22.
Why can the light not be switched on after unpacking?
The portable lights from Louis Poulsen are supplied in transport mode to protect the batteries. Transport mode must be deactivated for initial start-up. To do this, connect the light to the mains using the USB-C cable supplied. Make sure that at least 1.5 A is available. Then touch the ON/OFF/DIM switch on the top of the light. The status indicator (next to the USB port) should now light up and start pulsing. The light flashes twice and is now no longer in transport mode. If this process is not successful, please check the cable and mains adapter used for suitability.
You may also like these articles
Offer
