S 64 V Dark Melange Cantilever Chair, Sage
has been added to your wishlist.
Dining with Thonet: Six Thonet Dining Chairs for the price of five
*Promotion applies to all chairs in the Thonet Dining category/a>
Details
Product type | Cantilever chair |
Dimensions |
(1) Height: 82 cm (2) Width: 58 cm (3) Depth: 62 cm (4) Seat height: 46 cm (5) Armrest height: 67 cm |
Weight | 7,3 kg |
Material | Frame: Tubular steel, chrome plated Seat and backrest: wickerwork or synthetic net weave Frame and armrests: Beech, stained or white lacquered Glides (optional): plasti or felt pads |
Variants | The Thonet S 64 V Dark Melange is a special version of the original design S 64. Also available as a version without armrests S 32 V in Dark Melange. |
Colours | Wood Wickerwork |
Function & Properties | As seats are usually exposed to heavy use, there is a transparent, plastic mesh (supporting tissue) underneath the the wickerwork in the seat. Not stackable |
Manufacturing | |
Care | Natural materials need special attention. The wickerwork should be regularly moistened on the rough bottom / back, to maintain its elasticity - this is especially important in dry and/or air-conditioned rooms. Dryness over a long time making the natural material brittle and susceptible to cracking. Should the wickerwork start to lose threads these can be attached with an adhesive. Subjecting the chairs to point specific heavy loads must be avoided. Please click on picture for detailed information (ca. 0,2 MB). |
Certificates & Sustainability | Thonet has declared sustainability to be a corporate principle. The manufacturer continuously optimizes all processes from production/technology, materials management and recyclability to transport routes and constantly pays attention to resource-saving energy and material consumption. Last but not least, social and ethical principles are among the top priorities. Thonet has been awarded the "Green Globe Certificate" for its measures of sustainable and environmentally friendly management - further information can be found here. |
Warranty | 24 months |
Product family | Thonet Cantilever Chairs |
Datasheet | Click fo more information (ca. 3 MB). |
Product presentation |
FAQ
Is it possible to retrofit glides to an S 64/S 64 N?
A Thonet cantilever chair is specially produced to allow a retrofitting with plastic glides (transparent or black) with or without felt insert using the pre-punched drill holes, add an additional 11 mm to the overall height and cost 29,- EUR per set / chair.On older cantilever models produced before 2010, the Thonet frames were pre-punched as standard and the glides are installed as follows: With a 4.2 mm drill (available at any hardware store or as the special-hardened Thonet drill bits for Euro) bore holes in the marked locations. The felt pads can then be attached using the supplied self-tapping screws.
Is the S 64/S 64 N also available without armrests?
Yes, the version without armrests is the Thonet S 32.
What is the supporting material under the seat of a S 64/S 64 N?
For chairs which are exposed to particularly heavy use, a transparent plastic mesh can be fitted under the wickerwork. The S 64 is however also available without the supporting tissue.