...In addition to the metal DAX, wood DAW, rod DAR swivel PACC and rocking RAR bases we know today there was also a version with a single pedestal, a low lounge version - a version which if you ask us must have a place in our contemporary tablet and smartphone centred society - and the most charming bar stool/atelier height wooden legged version which, aside from the fact that the extra long wooden legs give the chair an elegance and balance that the DAW can't come close too emulating, ...
|Product type||Multi-purpose chair|
Dimensions in mm
(More Hopsak colours available on request)
|Material||Seat shell: batch-dyed polypropylene
Frame: tubular steel, chrome plated or powder coated
Seat cushion/full upholstery: Hopsak (100% polyamide)
|Variants||Optionally available with seat cushion or full upholstery
In the version with full upholstery: edge reinforcement (piping) on black seat shell in black, otherwise white
Available with glides for carpets or felt glides for hard floors
Please note: The chairs come as standard with black (felt) glides, White (felt) sliders can be ordered separately.
|Function & properties||Not stackable
Suitable for outdoor use (version with basic dark powder coated base)
|Care||To clean the plastic surfaces a soft, damp cloth and a mild, neutral detergent is recommended.
Dust and lint can be simply vacuumed. To treat stains a damp cloth and a mild, neutral detergent is recommended.
Professional cleaning should always be undertaken in an assembled state and with the use of upholstery foam or using a mobile washing extraction device.
|Awards & museum||MoMA, New York|
|Certificates||EN 13761 (Office furniture - Visitor chairs)
EN 1728 (Furniture - Seating - Test methods for the determination of strength and durability)
|Sustainability||The Vitra Eames DAX is:
contains up to 14% recycled material
Vitra conform to
ISO 90001: 2008 (Quality management systems)
ISO 14001: 2004 (Environmental management systems)
|Accessories||Suitable Seat Pad for Eames Armchairs and Leather Seat Pad by Parkhaus Berlin or Seat Dots by Vitra|
|Product family||Eames Plastic Chairs
|Datasheet||Please click on the picture for detailed information (ca. 2,7 MB).
How much weight can a Vitra Eames DAX support?
The Vitra Eames DAX meets the "GS" test standards and is tested up to 110kg. The way in which the chair is used is also important. Swinging, for example, causes a higher strain which can reduce the chairs lifetime.
Can upholstery be added to an non-upholstered seat shell?
The Hopsack seat cushion is fixed to the seat shell with screws. For both the Eames side chair and Eames armchairs seat cushions can be ordered from Vitra, attaching this does however require special tools and is a job for specially trained technicians. (As an alternative smow offer cushions from Parkhaus in a range of colours.)
Why is there a new seat height?
Since Charles and Ray Eames designed the chairs the average height of the population has grown by around 10 cm. Therefore, in addition to adjusting the height of the Eames Lounge Chair in 2015, Vitra also adapted the Plastic Chairs (DSW/DAW, DSR/DAR, DSX/DAX) to better meet current user needs. The bases of the chairs are consequently now on average 2 cm higher. The change is minimal and accordingly can only be seen in direct comparison. Bases of the original height (41 cm) are still available as spare parts on request.
Can the Vitra Eames DAX be used outdoors?
Only the Vitra Eames DSR with the powder coated base can be used outdoors; special additives in the polypropylene slowing down the fading process. Despite that Vitra recommend not to leave the chairs in the sun for longer than necessary. Felt pads are not suitable for outdoor use, for outdoor use the plastic glides should always be used. Upholstered versions are not suitable for outdoor use.
How is the seat height measured?
The seat height is determined according to the European standard EN 1335-1. This states that the chair be clamped in a special tester and loaded with a weight. The dimensions are then determined in the loaded state. The seat height being measured at a position defined by the standard and when in the load bearing state. The stated seat height cannot be measured with a conventional measuring device, rather is a normalised comparison value so that different chairs (for example, with and without height adjustment, or with varying thickness of seat cushion, etc.) can be compared with one another.
How do I recognise an original Eames Plastic Chair?
On the underside of the seat shell, the material marking PP indicates the polypropylene used for the shell, a seal certifies the safety of the chair and a sticker indicates the place of manufacture and serial number. In addition, Vitra always supplies the original fully assembled.
The Vitra Eames Plastic Chairs: An Overview
Eames Side Chairs
Vitra Eames DSR
DSR: Dining Height Side Chair Rod Base
Vitra Eames DSX
DSX: Dining Height Side Chair X-Base
Vitra Eames DSW
DSW: Dining Height Side Chair Wood Base
Vitra Eames PSCC
PSCC: Pivot Side Chair Cast Base on Castors
Vitra Eames DSS-N / DSS
DSS-N/DSS: Dining Height Side Chair Stacking Base
Vitra acquired in 1957 the exclusive license for the designs of Charles and Ray Eames in Europe and the Middle East: by which time the pair's fibreglass chairs were well on their way to becoming classics of 20th century furniture design. In 1992 both Herman Miller in the USA and Vitra in Europe switched from the use of fibreglass to polypropylene: Design and shape remained the same, however the burden on the environment through production and waste disposal was reduced considerably. Today Vitra is one of the most influential furniture manufacturers in the world; the fruitful cooperation with the heirs of the Eames estate and numerous collaborations with young and established designers being the key to the company's success. And beyond the Eames Classics Vitra generally places a great emphasis on high quality and recyclable materials; the longevity of the designer furniture is central to the sustainability philosophy. Vitra furniture are thus not only in terms of their appearance unrivalled classics, but thanks to their robust construction durable, long lasting and hard wearing classics.
Looking for the perfect seat shell for their chairs Charles & Ray Eames experimented with varied materials, and after several designs with plywood and aluminium finally arrived at fibreglass. That was the early 1940s and it took until the end of the decade before production technology had achieved a state that allowed fibreglass chairs to be mass produced economically. By 1950 the time had come and with the A-shell with armrests (Eames Plastic Armchair - e.g. Eames DAX) and the S-shell without armrests (Eames Plastic Side Chairs) two revolutionary chair types are born, and made available on a range of differing bases including the Rod Base (four-legged frame with wire struts), the Wooden Base (wooden frame), Cast Base (Five Star frame made of die-cast aluminium with wheels) and the X-Base with its four-leg tubular steel frame and which supports the Vitra DAX: DAX standing for Dining Height Armchair X-Base. The ingenious concept of Plastic Chairs allowed Charles and Ray Eames to create with minimum effort a coherent collection which provides the perfect chair for any location every place and every occasion. In 1955 the series was extended by the stackable DSS Chair and today also includes a rocking chair - the Eames RAR.
More about 'DAX' in our blog
Da vi for nylig var på en lille rejse fik vi øje på en ægte Eames fiberglasbænk fra Herman Miller i en lufthavn. Tager man stedets ret begrænsede faciliteter i betragning, forekommer betegnelsen 'lufthavn' faktisk noget optimistisk, og vores hektiske...
On a recent trip we discovered a genuine Herman Miller Eames fibreglass chair bench at an airport. Being a relatively small airport - in fact so small that the word "airport" appears optimistic in describing it's capabilities - our frenzied photographing of...
All 'DAX' Posts