Glides for Thonet Cantilever Chairs (Set of 4)by Thonet — 35,70 €
3 % advance payment discount*: 34,63 € (Save 1,07 €)
The Glides (1 set) for the Thonet Cantilever Chairs form the perfect complement to the Thonet classic chairs. They can be easily added to all models with a pre-drilled hole. The price is per set of four sliders.
|Glide/accessory for Thonet tubular steel cantilever chair
|Plastic oder teflon
|Available with or without felt lining
|Function & properties
|Suitable for all chairs with a pre-drilled hole
|The cantilever glides can be retrofitted to Thonet tubular steel frames. For frames with pre-drilled or pre-punched screw holes, the glides are attached using self-tapping metal screws. This process can be somewhat forceful. The Phillips screws should be hand-tightened with a flush-fitting bit and a good cordless screwdriver at low speed. In order for the screwing to take place with less resistance, we advise the use of suitable technical lubricant or some technical oil. Please apply lubricant or oil to the screws with a brush or swab and then start the assembly process.
|One set of four glides optionally with or without continuous felt