| Product type | Office swivel chair |
| Dimensions |  Dimensions in mm |
| Colours | Seat shell                 Seat cushion / full upholstery, Hopsak                   (Further Hopsak colours available on request) |
| Material | Base: 5-star base made of die cast aluminium, polished Covers: Hopsak (100% polyamide) Seat shell: Colour white non-RE: dyed-through polypropylene Colour white RE: post-industrial polypropylene (RIP) All other RE colours: post-consumer recycled material (PCR) Please note: The RE plastic employed for the Eames Plastic Chair seat shells is composed of granules of recycled plastics from the German "Yellow Sack" packaging recycling system and approx. 10% fibreglass material to achieve the necessary rigidity. The familiar colours of the seat shells do not change as a result of this material change. However, with the lighter seat shell colours tiny pigments of differently coloured granules may be visible upon closer inspection. These pigments do not represent a defect, but are a feature of the new sustainable material. Below is a comparative example of the colour "ice grey" in high magnification - the new material is on the right.  |
| Variants | Optionally available with full upholstery, edge reinforcement (piping) see picture. Optionally available with soft castors for hard floors or hard castors for carpets |
| Function & properties | Height adjustable Swivelling Maximum load: 110 kg |
| Care | A soft, damp cloth and a mild, neutral detergent is recommended to clean the plastic surfaces. Dust can be simply vacuumed . For the treatment of stains, a damp cloth and a mild, neutral detergent are recommended Professional cleaning should be done in the assembled state using upholstery foam or using a mobile washer-extractor. |
| Awards & museum | MoMA, New York |
| Certificates | GS mark for safety BIFMA |
| Sustainability | Vitra conform to ISO 9001: 2008 (Quality management systems) ISO 14001: 2004 (Environmental management systems) Since the beginning of the production year 2024 the Eames Plastic Chair seat shells have been been manufactured from a recycled material, the so-called RE plastic. RE plastic material consists of granules of recycled plastics from the German “Yellow Sack” packaging recycling system. This new material is not only recycled but 100% recyclable, In addition its production generates significantly lower climate-damaging emissions and requires less energy. Since June 1st 2019 Vitra has been operated a take-back program: Eames Fibreglass Chairs and Eames Plastic Chairs that are no longer required can be returned to Vitra. |
| Warranty | 24 months Register product and secure extended manufacturer's warranty of 10 years |
| Accessories | Complimenting seat pads and leather seat pads by Parkhaus Berlin or Seat Dots and Soft Seats (Typ B) byVitra |
| Product family | Eames Plastic Chairs |
| Datasheet | Please click on the image to obtain detailed information (approx. 10.4 MB) |
PsCC means Pivot Side Chair Cast Base on Castors.
The designation RE means that the Eames Plastic Side Chair RE PSCC is made from recycled plastic, a material from which the Eames Plastic Chairs RE have been produced since the beginning of 2024. With the introduction of the new sustainable material, three new colour nuances were also introduced, the new white “Cotton White”, the new yellow “Citron” and the new green “Emerald”, which replace the previous colours white, sunlight and green respectively.
The colours white, yellow and green differ from the original colours in the new recycled Eames Plastic Chairs version.
No, manufacture of the Eames Plastic Chairs in the unrecycled material version will cease in early 2024 and in the future only the sustainable material will be employed in the Eames Plastic Side Chair RE PSCC.
The seat height is determined according to the European standard EN 1335-1. This states that the chair be clamped in a special tester and loaded with a weight. The dimensions are then determined in the loaded state. The seat height being measured at a position defined by the standard and when in the load bearing state. The stated seat height cannot be measured with a conventional measuring device, rather is a normalised comparison value so that different chairs (for example, with and without height adjustment, or with varying thickness of seat cushion, etc.) can be compared with one another.
On the underside of the seat shell, the material marking PP indicates the polypropylene used for the shell, a seal certifies the safety of the chair and a sticker indicates the place of manufacture and serial number. In addition, Vitra always supplies the original fully assembled.
The new colour palette allows for more possible combinations and offers a broader spectrum of different colour shades with the delineation into "Natural Tones", "Mid Tones" and "Bright Tones".
Vitra Eames DSR
Dining Height Side Chair Rod Base
Vitra Eames DSX
Dining Height Side Chair X-Base
Vitra Eames DSW
Dining Height Side Chair Wood Base
Vitra Eames PSCC
Pivot Side Chair Cast Base on Castors
Vitra Eames DSS-N / DSS
Dining Height Side Chair Stacking Base
Vitra Eames DAR
Dining Height Armchair Rod Base
Vitra Eames DAX
Dining Height Armchair X-Base
Vitra Eames DAW
Dining Height Armchair Wooden Base
Vitra Eames PACC
Pivot Armchair Cast Base on Castors
Vitra Eames RAR
Rocking Armchair Rod Base
Vitra Eames LAR
Lounge Height Armchair Rod Base
Vitra Eames DAL
Dining Height Armchair La Fonda Base
Vitra DSR Fiberglass
Dining Height Side Chair Rod Base
Vitra DSX Fiberglass
Dining Height Side Chair X-Base
Vitra DSW Fiberglass
Dining Height Side Chair Wood Base
Vitra DAR Fiberglass
Dining Height Armchair Rod Base
Vitra DAX Fiberglass
Dining Height Armchair X-Base
Vitra DAW Fiberglass
Dining Height Armchair Wooden Base
Vitra RAR Fiberglass
Rocking Armchair Rod Base
Vitra LAR Fiberglass
Lounge Height Armchair Rod Base
Vitra DKR Wire Chair
Dining Height K-Wire Shell R-Rod Base
Vitra Eames Wire Chair DKL
Dining Height K-Wire Shell LaFonda
Vitra Eames DKX Wire Chair
Dining Height K-Wire Shell X-Base
Vitra Eames DKW Wire Chair
Dining Height K-Wire Shell Wood Base
Vitra Eames DKR Wire Chair Checker
Dining Height K-Wire Shell R-Rod Base
Vitra Eames DCM
Dining Chair Metal
Vitra Eames LCM
Lounge Chair Metal
Vitra Eames LCM Calf's Skin
Lounge Chair Metal Calf's Skin
Vitra Eames DCW
Dining Chair Wood
Vitra Eames LCW
Lounge Chair Wood
Vitra Eames LCW Calf's Skin
Lounge Chair Wood Calf's Skin
...The Eames plastic side chair shell was released a year later in the complementary DSX, DSW, DSR, PSCC and RSR versions, and the first upholstered plastic chairs appeared in 1953...
Da vi for nylig var på en lille rejse fik vi øje på en ægte Eames fiberglasbænk fra Herman Miller i en lufthavn. Tager man stedets ret begrænsede faciliteter i betragning, forekommer betegnelsen 'lufthavn' faktisk noget optimistisk, og vores hektiske...
On a recent trip we discovered a genuine Herman Miller Eames fibreglass chair bench at an airport. Being a relatively small airport - in fact so small that the word "airport" appears optimistic in describing it's capabilities - our frenzied photographing of...
All 'PSCC' Posts
