|Product type||Multi-purpose chair|
Original seat height:
1: Height 81 cm
2: Width 46,5 cm
3: Depth 55 cm
4: Seat height 41 cm
New seat height:
1: Height 83 cm
2: Width 46,5 cm
3: Depth 55 cm
4: Seat height 43 cm
(Further Hopsak colours available on request)
Please note that wood is a natural material. Every base is unique and due to the influence of UV-radiation the colour pigments in the wood change during use.
|Material||Seat shell: Dyed-through polypropylene
Legs: Maple or Ash
Base supports: Round steel, basic dark
Upholstery: fabric Hopsak (100% polyamide)
|Variants||Optionally available with seat upholstery or full upholstery., edge reinforcement (piping) see picture
Available with glides for carpets or felt pads for hard floors
(Please note: All bases are equipped with black glides/pads. White glides/pads can be ordered separately.)
|Functions & Properties||Not stackable|
|Care||For cleaning the plastic elements always use a soft, damp cloth and a mild detergent.
Dust and fluff can be vacuumed, marks are best treated with a soft, damp cloth and a mild detergent.
Professional cleaning should be undertaken with the chair fully assembled and using upholstery foam or with a professional cleaning machine
|Awards & Museum||Permanent collection, MoMA, New York|
|Certificates||EN 13761 (Office furniture - Visitor chairs)
EN 1728 (Furniture - Seating - Test methods for the determination of strength and durability)
|Sustainability||The Vitra Eames DSW is:
contains up to 14% recycled material
Vitra conform to
ISO 90001: 2008 (Quality management systems)
ISO 14001: 2004 (Environmental management systems)
Vitra extends the repair and service offer for the Eames Fiberglass Chair and Eames Plastic Chairs and introduces a take-back programme, which will ensure proper recycling of the chairs at the end of their life cycle.
Register product and secure extended manufacturer's warranty of 10 years
|Accessories||Suitable Seat Pad for Eames Side Chairs and Leather Seat Pads by Parkhaus Berlin or Seat Dots by Vitra|
|Product family||Eames Plastic Chairs
|Product datasheet||Please click on the picture for detailed information (ca. 2,7 MB).
How much weight can a Vitra Eames DSW support?
The Vitra Eames DSW meets the "GS" test standards and is tested up to 110kg. The way in which the chair is used is also important. Swinging, for example, causes a higher strain which can reduce the chairs lifetime.
Which colour are the wooden legs?
The Eames DSW wooden legs are stained maple. They were previously available in a red tone; however, since 2009 they have been produced in a yellow tone. In 2013 Vitra introduced a dark maple and a black maple versions
Why is there a new seat height?
Since Charles and Ray Eames designed the chairs the average height of the population has grown by around 10 cm. Therefore, in addition to adjusting the height of the Eames Lounge Chair in 2015, Vitra also adapted the Plastic Chairs (DSW/DAW, DSR/DAR, DSX/DAX) to better meet current user needs. The bases of the chairs are consequently now on average 2 cm higher. The change is minimal and accordingly can only be seen in direct comparison. Bases of the original height (41 cm) are still available as spare parts on request.
Can upholstery be added to an non-upholstered seat shell?
The Hopsack seat cushion is fixed to the seat shell with screws. For both the Eames side chair and Eames armchairs seat cushions can be ordered from Vitra, attaching this does however require special tools and is a job for specially trained technicians. As an alternative (smow) offer cushions from Parkhaus which have been specially created to fit the Eames plastic chair series.
The fully upholstered version is composed of a formed polyurethane foam shell covered with the textile Hopsack.
The full upholstered seat shell is produced as follows:
The foam cushion is glued to the seat shell. The welting is heated and stitched to the cover, this complete unit is then heated. The cover is then fixed to the foam cushion and the welting bound to the seat shell. Through cooling the welting attaches itself firmly to the shell. Consequently it is not possible to fully upholster an unupholstered chair.
How is the seat height measured?
The seat height is determined according to the European standard EN 1335-1. This states that the chair be clamped in a special tester and loaded with a weight. The dimensions are then determined in the loaded state. The seat height being measured at a position defined by the standard and when in the load bearing state. The stated seat height cannot be measured with a conventional measuring device, rather is a normalised comparison value so that different chairs (for example, with and without height adjustment, or with varying thickness of seat cushion, etc.) can be compared with one another.
How do I recognise an original Eames Plastic Chair?
On the underside of the seat shell, the material marking PP indicates the polypropylene used for the shell, a seal certifies the safety of the chair and a sticker indicates the place of manufacture and serial number. In addition, Vitra always supplies the original fully assembled.
Why a 2019 colour update?
The new colour palette allows for more possible combinations and offers a broader spectrum of different colour shades with the delineation into "Natural Tones", "Mid Tones" and "Bright Tones".