One of the biggest challenges facing product designers in coming years will undoubtedly be the question of planned obsolescence. For while we genuinely believe that the majority of designers understand their responsibilities in terms of sustainability and...
|Product type||Cantilever chair|
(1) Seat height: 45 cm
(2) Width: 56 cm
(3) Depth: 52 cm
(4) Height: 82 cm
Optional seat pad:
Width: 39,6 cm
Depth: 38,9 cm
Height: 0,5 cm, with upholstery 1,6 cm
|Colours||Seat pad (optionally)
|Material||Seat and backrest: beech, plywood
Frame: Tubular steel, chrome plated or stainless steel
Seat pad (optional): felt (100% wool), padding: foam
Glides (optional): plastic, black
|Variants||Available in different finishes
Optional with felt seat pad upholstered/unupholstered
Optional felt glides for hard floors
Version without armrests S 43 Classic and S 43 Classics in Colour can be ordered separately
|Accessories||Suitable Seat Pad for S 43F Classic by Parkhaus Berlin available separately in many more colours|
|Function & Properties||Non stackable|
|Care||For cleaning the wood and metal surfaces a soft, damp cloth and a mild, neutral detergent is recommended
Please click on picture for detailed information (ca. 0,7 MB).
|Certificates & Sustainability||Thonet has declared sustainability to be a corporate principle. The manufacturer continuously optimizes all processes from production/technology, materials management and recyclability to transport routes and constantly pays attention to resource-saving energy and material consumption. Last but not least, social and ethical principles are among the top priorities. Thonet has been awarded the "Green Globe Certificate" for its measures of sustainable and environmentally friendly management - further information can be found here.|
|Product family||Thonet Cantilever Chairs|
|Datasheet||Please click on picture for detailed information (ca. 2,4 MB).
Is it possible to retrofit felt glides to an S 43F Classic?
A Thonet cantilever chair is specially produced to allow a retrofitting with plastic glides (transparent or black) with or without felt insert using the pre-punched drill holes, add an additional 11 mm to the overall height and cost 29,- EUR per set / chair.On older cantilever models produced before 2010, the Thonet frames were pre-punched as standard and the glides are installed as follows: With a 4.2 mm drill (available at any hardware store or as the special-hardened Thonet drill bits for Euro) bore holes in the marked locations. The felt pads can then be attached using the supplied self-tapping screws.
Can replacement S 43 F Classic seats or backrests be ordered?
Replacing seats and backs is not so simple with this particular model as the seat and back are not attached by screws but rather are riveted. In addition, over the years the contours and radii of the seat and back have changed. Consequently, depending on how old your chairs are, contemporary backs and seats may not fit. Therefore Thonet recommends chair frames be sent to the factory, where a new back and/or seat can be added.
With the S 43F Classic Dutch architect and designer Mart Stam gifted the history of furniture another classic. As early as 1926 Stam had exhibited a first version of a cantilever chair, the S 33; parallel Ludwig Mies van der Rohe presented his cantilever chair design at the exhibition "The Apartment" in Stuttgart's modern Weißenhofsiedlung. Defined by its reduced, very clear design and simple aesthetic the Thonet cantilever chair S 43F Classic. remains contemporary and relevant some eight decades after Mart Stam originally presented it. The phenomenon of the cantilever chair is closely associated with the Bauhaus. In the metal workshop of the school students experimented with the different properties of various metals resulting in the production of several tubular steel chairs; consequently, cantilever chairs such as the S 43 classic have become the epitome of the Bauhaus chair. In contrast to other chairs of the era the seat and backrest of the S 43F are crafted from moulded plywood and - in comparison to the Thonet S 43 - the Thonet S 43F has armrests.
All Thonet furniture is produced at the company's factory in Frankenberg, Hessen. Founded in 1819 by Michael Thonet by the 1920s Thonet had advanced to become the leading manufacturer of steel tube furniture and produced from 1931 Mart Stam's S 43F. With the S 43F Classic ground or polished stainless steel is bent to form the one-piece chair frame. The moulded plywood shells for the back and seat of the Thonet S 43F made from selected non-steamed woods sourced from European forests, and are available in various finishes. Thonet places a particularly high importance on environmental responsibility in all aspects of their manufacturing processes and, for example, use an especially environmentally safe hydro lacquer which contains only 2% solvent. A further guarantee for the sustainability of the Thonet S 43F is the high quality of all materials used and their associated durability and very long life span.
In the so-called "Roaring Twenties", the world underwent a great many socially, economic and cultural changes. In terms of furniture design the leading position in this movement was unquestionably taken by the Bauhaus school opened in Weimar in 1919. The pioneering role of the school was and is largely expressed by the new form languages its students developed and their experimental approach to working with new materials. Designs such as Mart Stam's cantilever chair S 43F were, at that time, revolutionary and are still regarded as defining works of classical modernism. The central aspect of modern furniture design as developed at Bauhaus was the ability to produce objects industrially and so thanks to affordable prices, accessible for broad sections of society. In 1933 Thonet furnished the German National Library in Leipzig with S 43 F cantilever chairs, and 70 years later the chairs are still in use; testament if it was needed to Thonet's commitment to quality, durability and longevity in its furniture design and production
Born on August 5th 1899 in Purmerend, Netherlands, Mart Stam spent a large part of his life in Germany, Switzerland and the Soviet Union. In the late 1920s Mart Stam enrolled at Bauhaus Dessau, where he was ultimately to design his cantilever chairs. In 1930 Mart Stam went and his wife Lotte Beese travelled to the USSR, where he spent four years working on urban planning projects - and in 1931 designed the S 43F for Thonet. In 1935 Stam returned to the Netherlands, where he worked as an architect in Amsterdam. In 1948 he was appointed director of the Academy of Arts in Dresden, and in 1952, the Academy of Arts in Berlin Weissensee. The 1950s formalism debate in the DDR however forced Mart Stam Weissensee to leave in 1952. In 1966, he emigrated to Switzerland, where he died on 23 February 1986.
In 1819 Michael Thonet opened a building and carpentry business in Boppard am Rhein, Germany: a building and carpentry business which was to develop into one of the most ground-breaking manufacturer of designer furniture. Representative for the early importance of Thonet is without question the bentwood furniture developed from the 1850s, works such as the coffee house chair 214. Later the company evolved to become the most important producer of bent steel tubing furniture, including works such as Mart Stam's S 43F or Marcel Breuer's S 32/64. In both cases it was the Thonet company that helped new materials and new manufacturing processes become possible, accepted and commercially successful. The manufacturing of Thonet furniture is undertaken today at the company's headquarters in Frankenberg / Eder in Hessen. Thonet is currently led by Peter Thonet, a direct descendant of Michael Thonet. Next to the S 43F Cantilever the Thonet portfolio is home to many bentwood and tubular steel classics, as well as modern designs by the likes of James Irvine, Delphin Design and Stefan Diez.
More about 'S 43 Klassik', 'S 43 ', 'S 43F' in our blog
...Browne - objects such as Mart Stam's S 43 cantilever chair and S 33 cantilever chair or Marcel Breuer's S 285 desk and B 9 stacking tables established themselves as popular classics...
...Thonet S 43 Classic by Mart Stam A further development of Mart Stam's classic cantilever chair design the Thonet S 43 mixes plywood with steel tubing to produce an unmistakable, reduced design that works just as well at a desk as at a dinning table... The S 43 is not only one of the most recognised works of the Bauhaus era, it is also one of the most copied...
Am letzten Sonntag der Sommerferien öffnen jedes Jahr über 35 Produktionen und Industriebetriebe aus der Gegend um Kassel zum "Blauen Montag Sonntag" ihre Türen. Der Name ist vielleicht etwas überambitioniert, aber die Idee dahinter ist gut und in diesem Jahr...
...This week also came the written judgement from Oberlandesgericht Düsseldorf in the case of Thonet against an Italian producer of Mart Stam copies, in particular the S 43 cantilever chair... The court decided that being a work of visual art the S 43 is still protected by copyright, and, as such, can only be produced by the licence holder; namely, Thonet...
In the next week or so we will be introducing here some of the new products from Thonet that are now available at smow.com. But before we get that far, a small video below that explains something of the story of Thonet furniture and the production process...
We're just a touch late with this one, but since July 22nd the Martin Gropius Bau in Berlin has been showing the exhibition "Bauhaus. A Conceptual Model". For the first time, the three German Bauhaus institutions - Bauhaus-Archiv Berlin, Museum für...